Electric bumper cars use guide

Getting ready before using

1. Examine the car: make sure the body pieces, particularly the bumpers, seats, steering wheel, and other important components, are securely attached, and look for any damage to the bumper car’s appearance. To make sure the car operates smoothly and safely, check the tires’ air pressure and see whether the surface is cracked, bulging, or too worn. At the same time, confirm that the power indication is normal and that the power source is correctly connected and has enough power.
2. Venue Survey: Specialized locations, like the bumper car area of amusement parks, are the best places to employ bumper cars. In order to avoid uncontrolled cars from colliding and causing danger, make sure the site is level, dry, free of water, and free of sharp obstructions and potholes. Additionally, make sure there are enough safety protection facilities surrounding the site, such as fences and buffer pads.
3. Driver readiness: drivers must be in good health, abstain from alcohol, drugs, and other behaviors that impair their ability to drive, wear appropriate footwear and clothing to prevent loose or long garments or high heels from impairing the operation, children must be supervised by an adult while driving, and their height and weight must match the specifications of the vehicle ride.

Driving operation

1. Get in the car and start: hold the steering wheel with both hands, sit in the driver’s seat smoothly, and adjust the seat position to be comfortable and easy to operate the pedals and steering wheel. Insert the key and turn it clockwise to the start position, some bumper cars may have a start button, press it to start the vehicle, and pay attention to the dashboard indicator after starting to confirm the vehicle system is normal.
2. Driving: Press the accelerator pedal lightly with your right foot, slowly increase the pedal strength, and the vehicle will gradually accelerate forward. Turn the steering wheel left and right to control the direction of the vehicle, the angle of rotation should be moderate, to avoid a large sharp turn resulting in a collision out of control. Keep your attention and observe the position of other vehicles and obstacles in the field to avoid collision in advance.
3. Collision skills: One of the fun things about bumper cars is the collision, but pay attention to safety. When colliding, you should choose the bumper part of the vehicle to make contact with and avoid colliding with the side of the body or other fragile parts to prevent vehicle damage or personnel injury. Collision strength should be properly controlled, and not too violent, especially when children driving, guardians should remind children to avoid dangerous collision behavior.

Precautions after use

1. Parking: When you’re done driving, let the car slow down naturally, step on the brake pedal to stop it, raise the handbrake (if it has one) to keep it from sliding, and then draw up the accelerator pedal.
2. Turn off the power: To prevent excessive battery depletion that shortens its lifespan, turn the key counterclockwise to the off position or press the power off button to turn off the vehicle’s power source.
3. Vehicle Inspection and Tidying Up: After exiting the car, inspect it once more for any additional damage, clean the inside, and remove any trash or personal items that may have been left inside. If you find any malfunction or abnormality in the vehicle, inform the venue staff in time for maintenance and processing, so that the subsequent users can use it normally.